AVK Certus 80/30

Certus PE ball valve

PE Ball Valve

The AVK CERTUS ball valves have been independently type tested against worldwide leading standards. Also they have undergone additional testing over and above that required in the specifications. This ensures that the valve is suitable for distribution systems and environments anywhere in the world.

The AVK CERTUS ball valve range consists out of multiple sizes starting as of OD20 up to OD180mm. Depending on the requested pressure rating the valves are available with SDR11 or SDR17.6 spigot ends.

The valves can be used for multiple application areas. The selected materials are tested and approved for both GAS and WATER applications. When used in GAS applications the valves are rated up to MOP10 and in case of WATER applications PN16.

Tests/Approvals: GIS/V7-2, EN12201-4, EN1555-4 and ISO4437-4.

Accessories

AVK Magnus

AVK Magnus PE Ball Valve

PE Ball Valve

The AVK MAGNUS Series 85/50 is an extensive range of PE100 ball valves up to OD180mm, which have been extensively and independently type tested against worldwide leading standards such as EN1555-4 and EN12201-4. Also they have undergone additional testing over and above that required in the specifications. This ensures that the valve is suitable for distribution systems and environments anywhere in the world.

The extensive AVK MAGNUS ball valve range consists out of multiple sizes starting as of OD25 up to OD180mm. Depending on the requested pressure rating the valves are available with SDR11 or SDR17.6 spigot ends.

The valves are UNIVERSAL, meaning the same valve can be used for multiple application areas. The selected materials are tested and approved for both GAS and WATER applications. When used in GAS applications the valves are rated as MOP10 and in case of WATER applications PN16.

Tests/Approvals: EN1555-4, ISO4437-4, GB/T 15558.4 and EN12201-4

Accessories

AVK Magnus PE Ball Valve

HDPE Fusible Ball Valve

The AVK HDPE fusible ball valve is for use in the isolation of water & gas on domestic, commercial and industrial premises. The ends are designed for butt-/electro-fusion making the valve an integral part of the fully welded leak-free pipe system.

The valve meets or exceeds requirements of ASME B16.40, ASTM D2513 and CFR 49 part 192 for gas applications.

NSF61 certified for drinking water